Rainbow Wireless Touching RGB LED Controller 3 Channels

Rainbow Wireless Touching RGB LED Controller 1.3 types remote are optional 2.18A for 3 Channels 3.Sensitive touch sensor

Rainbow Wireless Touching RGB LED Controller 3 Channels(SC-RF-A-TOUCH)

Detailed pictures: 

 

Advantages:

This rainbow RF wireless touching rgb led controller adopts the advanced micro control unit, which can realize multistage touch dimmer.Adopting advanced sensitive touch sensor ring on the remote design, with high sensitive touch sensor ring, through the touch remote method, realize flexible control: jumpy changing, gradual changing, stroboflash and other effects of change.To touch  will present wonderful, fashion performance to change the color as you want.Matching with the RGB strip to produce all kinds of colorful light.Convenient and easy to connect, simply to adjust out.A few samples are in stock.

Application:

     Tt is used for controlling a variety of lamp whose source of light is LED. For instance, point source of light, flexible light strip, wall washer lamp, glass curtain wall light and so on;

Connection:

 

How to use:

Direction for use:

Connect the load wire at first, following by power wire.  Please ensure short circuit can not occur between connecting wire before you turn on the power: Turn on the controller, lighting products which connected with controller will light for 5 seconds and then shut off. The controller is doing initialization during this time.Put the batteries into remote.  Put batteries into remote. The indicator light will light for 5 seconds then shut off. The remote is doing initialization during this time.Normal working mode: After both controller and remote finished initialization (lighting products which connected with controller shut off & indicator light on the remote shut off). Please touch "on" key of the remote to turn on remote. Now controller enter Rainbow touch ring mode.

 Mode A: Rainbow touch ring mode. Under this mode, you can choose the color you want simply by touching the color ring. You can increase and decrease color and brightness with Key3, 4, 6 ,7. When the controller is under Mode A, you can touch "on" key again to enter Gradual changing mode.

 Mode B: Gradual change mode. Under this mode, light will change gradually. You can use key 3, 4 to increase or decrease changing speed. When the controller is under Mode B, you can touch "on" key again to enter color jumping mode.

Mode C: 7 color jumping mode. Under this mode, light will jumping independently. You can use key 3&4 to increase or decrease jumping speed.

Notice:

Under gradual change or jumping mode, touching "on" key will change one to the other. If you want to enter Rainbow touch ring mode, you need to touch "off" key to turn off controller and turn on again by touch "on" key.When touch 4 key for seconds, the light gradually change to white balance. Then it could not be changed by color ring. Please press key 3 and increase the color saturation level to the maximum to change the color.

Solutions for problems: Match & dis-match controller & remote:

Normally our remote and controller are matched in factory. You can use it directly. If the remote failed to control the controller. Please try to use the following way to match the remote & controller.You can also use the following way to match the remote to the controller. With this way, you can make many remotes match with one controller, or one remote match with many controllers.

 Connect controller to 12V/24V power supply, the light product will light for 5 seconds and then turn off.

  We should do the following steps within above 5 seconds (before lighting products turning off).

Push batteries into remote, indicator light on the remote will be on.Touch the smaller * key to turn off the display light.Touch the “on” key to finish match or dis-match.

  3.     If the remote is matched with controller before, it is not matched after above operation. Lighting products will be red color.

  4.     If the remote is not matched with controller before, it is matched after above operation. Lighting products will be purple color or blue color.

Note:

Input voltage of remote control must be the same as RGB strip's.Match the color of output wiring when connecting.When the color doesn't match ,for example ,it displays blue when touch green, or displays green when touching blue ,please check whether the wiring is correct ,in this case ,exchange each other.

Rainbow Wireless Touching RGB LED Controller 3 Channels